Help on rife machines 
homer38
11 y
2,219
† Cross †
I am looking at getting a F-165 Robin At frequency generator to start zapping manually first with paddles and then build on that with more effective delivery. Does anyone have any advise on what might be a good add on to improve penetration of the frequencies with cost effectiveness in mind?- Re: Help on rife machines parazapper
11 y
1,988
This is a reply to # 2,117,603My choice is direct contact application with copper paddles and augmentation foot pads at the same time. This produces a 4 point contact system with 3 points positive.
See: http://paradevices.com/footpad_zapping.html
- Re: Help on rife machines johny apple bomb
11 y
2,131
This is a reply to # 2,117,603Use the carrier wave feature at over 1 Megahertz for way better penetration. They call it Back Frequency in the Atelier manual.
" 3.1 MHz RF (Radio Frequency) carrier which produces the harmonic sideband frequencies used in the 1930's, 1940's and 1950's equipment." Claim below.
http://www.gb4000.org/
- Re: Help on rife machines Johny Apple Bomb
11 y
2,345
This is a reply to # 2,119,257These are high quality hand holds. They require banana plug jacks.
http://shop.toolsforhealing.com/Copper_Handholds_for_RSG_1_p/sr-chh.htm
- Re: Help on rife machines Johny Apple Bomb
11 y
2,345
- Re: Help on rife machines jaguar57
11 y
2,182
This is a reply to # 2,117,603see http://www.dragonfly75.com/eng/scams.html
I used to sell Rife machines but stopped because they were generally ineffective. Beck devices stomp all competition
- Re: Help on rife machines parazapper
11 y
1,988
fetched in 0.0469 sec, IP =108.162.216.206, y=1