CureZone   Log On   Join
Re: CS bitter aftertaste
 
hmaxim Views: 9,530
Published: 15 years ago
 
This is a reply to # 84,418

Re: CS bitter aftertaste


Why filter at all? Your CS batch should be free of any particles unless there is such a buildup of silver oxide on your electrodes that they fall off into the brew. But then, you are either brewing too long, do not have a controlled current generator, or are not stirring and aglomeration is occuring. You should be able to easily produce a Crystal C. batch at 20 ppm with absolutely no particles to filter. My SG6 does that every time, perfectly. My DW measures 1.5 PPM on a Hanna COM-100 meter. Before I had an SG6 I was using either three 9 volt bateries, or a 30 volt dc power supply. I always got a yellow brew with clumps of silver oxide in the batch. You need a better process to make a better brew. There really is a difference in the quality and effectiveness of CS when you have a good CS generator.
 

 
Printer-friendly version of this page Email this message to a friend
Alert Moderators
Report Spam or bad message  Alert Moderators on This GOOD Message

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!


 

Donate to CureZone


CureZone Newsletter is distributed in partnership with https://www.netatlantic.com


Contact Us - Advertise - Stats

Copyright 1999 - 2021  www.curezone.org

0.797 sec, (1)