CureZone   Log On   Join
Re: How to use silver wire.
GLMao Views: 1,186
Published: 19 years ago
This is a reply to # 81,767

Re: How to use silver wire.

Hello !
First, heat the dis water to about 100°C. Then fill it into glass or ceramic pot (or the glass bottle, but I would suggest sth not transparent). Put the pot on a candle (like if you would keep coffee warm). This is important because the water must circulate to become filled with CS particles. Then cautiously(!) put in the silver sticks into the water with a distance of about 5-7 cm.
After 10-20 mins the water should get a yellow or brownish color.

See you and good luck !

PS: oh.. forgot to mention: be careful when removing the silver sticks from water. Sometimes some small parts of silver which are not colloidal can get into the water. That's very toxic and poisonous.

Printer-friendly version of this page Email this message to a friend
Alert Moderators
Report Spam or bad message  Alert Moderators on This GOOD Message

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!


Donate to CureZone

CureZone Newsletter is distributed in partnership with

Contact Us - Advertise - Stats

Copyright 1999 - 2022

0.328 sec, (1)