CureZone   Log On   Join
PPM Test
 
Johny Apple Bomb Views: 2,185
Published: 16 y
 

PPM Test


I decided to do some pool strip testing of various mixes of Miracle-Mineral-Supplement . In book 2 it is said that 6 drops activated would be about 1 PPM. I don't know how accurate this test is but their is (total chlorine) and (free chlorine) test squares. Along with 4 other test squares for other than chlorine.

It varies a lot depending on how much water you put in. I put 6 drops of Miracle-Mineral-Supplement . 30 drops of lime activator. After 3 minutes with a lid to make it stronger, I put in 1/4 cup of distilled water and it was about 3 to 10 ppm. I added another 1/4 cup of water and it went down some. I added another 1/4 cup of water and it was about 3 ppm.

With one drop of Miracle-Mineral-Supplement and doing the same as above I got 1 ppm and with more water it seemed to be just a little weaker but it was hard to tell. So if you believe 1 PPM is the safe dose just use one drop.

I don't think Humble really cared about this as he was doing things to make it stronger like using citric acid and putting a lid on it while activating. Basically you start with one drop and slowly work your way up until you have a slight problem. As far as I'm concerned the government guidelines error on safety and are usually inaccurate.

Six drops is plenty. If you want to experiment with the higher doses I hope this gives you some idea of what your taking.



 

 
Printer-friendly version of this page Email this message to a friend
Alert Moderators
Report Spam or bad message  Alert Moderators on This GOOD Message

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!


 

Donate to CureZone


CureZone Newsletter is distributed in partnership with https://www.netatlantic.com


Contact Us - Advertise - Stats

Copyright 1999 - 2024  www.curezone.org

0.063 sec, (1)